Make Flammable Liquids
NON-FLAMMABLE!!!

Serving the fire-fighting community since 1977! We're Ready To Deal!

More About No-Flash

WHAT IS DENKO NO-FLASH PREVENTING EMULSIFIER?
DENKO NO-FLASH PREVENTING EMULSIFIER
is a biodegradable product that breaks down the molecular structure of hydrocarbons thereby making them water miscible.

WHERE IS DENKO NO-FLASH PREVENTING EMULSIFIER USE?
DENKO NO-FLASH PREVENTING EMULSIFIER
can be used to safely neutralize any non-ignited hydrocarbon spill big or small. This includes oil, gasoline, diesel, kerosene, etc. This product is used by fire departments, haz-mat teams, gas stations, manufacturing plants, trucking companies, airline companies and many more organizations that store, handle or transport petroleum based products. It's used on spills above or below surface, in sewer systems, in gas tanks at car accidents, to change the class when hauling and dumping flammable waste, on water surfaces such as lakes and ponds and much, much more.

HOW IS DENKO NO-FLASH PREVENTING EMULSIFIER USED?
DENKO NO-FLASH PREVENTING EMULSIFIER
will easily take care of small spills without the need of special equipment. The product can be poured or sprayed directly over the spill at a 20 to 1 ratio, gently agitated then flushed with water. The entire area will turn milky in color indicating that the area is secure and flash cannot occur. If there is sufficient pressure behind the water, such as with a booster line, agitation will take place when the water is applied. For large spills an inline eductor system, proportioner or any standard foam system can be used with a 1% flow. Bearing in mind that because the DENKO NO-FLASH PREVENTING EMULSIFIER is now being applied in a diluted state the area will require more agitation and working with the handlines. An extra margin of safety our product also contains an aqueous film forming agent that will remain on the surface until the area is completely cleaned up. In the event that an area of a large spill has not been thoroughly emulsified, the aqueous film will prevent ignition by sealing off the spill from an air source much the same as when using aqueous film forming foam.

WHAT EQUIPMENT IS REQUIRED FOR APPLICATION OF EMULSIFIER?
70% of the flammable liquid spills that occur in our country today are, in fact, not ignited. Of those 90% are small enough to be safely handled without a foam system. Our product is available in gallon containers that have a hand held trigger type sprayer that has proven to be all that is necessary for application on those small situations. In these cases a simple garden hose can supply the water. Pressurized extinguishers, Hudson sprayers and Indian tanks can serve well for small to moderate spills. For the large spills a conventional foam system is recommended. Before using this product test drills should be performed to ascertain the best applications for your situations.

WHY NOT JUST USE FOAM?
DENKO NO-FLASH PREVENTING EMULSIFIER
has three major advantages over foam. First and foremost is cost. Independent studies have shown that when you add up the total cost of equipment, man hours and materials our product reduces costs by as much as 90%. Secondly is that emulsifier can be used in places that foam can't such as sewer systems and underground storage tank leaks. Incidentally, it will also do a great job in cleaning the undercarriages and engines of fire apparatus or anything that has grease and oil on its surface. Finally is cleanup. If you use foam or any absorbing type product you still have to clean it up and dispose of it. In most situations, when using our product and providing you've added sufficient water, the spill can safely be allowed to dissipate.

WHERE CAN YOU BUY DENKO NO-FLASH PREVENTING EMULSIFIER?
DENKO NO-FLASH PREVENTING EMULSIFIER
is available at fire equipment and apparatus distributors, fire extinguisher companies and industrial and safety supply houses worldwide. Feel free to contact us for the distributor nearest you.

PACKAGING
55 gallon drum
5 gallon pail
PHYSIO-CHEMICAL CHARACTERISTICS
pH ...................................................................... 7.8 - 9.2
Boiling Point ....................................................... 212 degrees F
Vapor Pressure ................................................... 17
Vapor Density ..................................................... 2+
Specific Gravity .................................................. 1.02
Evaporation Rate ................................................. 0.1
Solubility in water ................................................ complete
Appearance ......................................................... amber liquid
PRODUCT DESCRIPTION PACKAGING PRICE
DEM-852A Flash Preventing Emulsifier 5 & 55 27.75

- All prices are per gallon f.o.b. Long Island, NY.
- Call or E-mail for special pricing large orders and bids.

< Products >
[ 6% AFFF ] [ 3% AFFF ] [ 1% AFFF ] [ Alcohol AFFF 3%-6% ] [ Double Strength ATC 3% - 6% ]
[ High Expansion Foam ] [ Drench ] [ Wetting Agent Concentrate ] [ Tank Saver ]
[ Hose Cleaner Concentrate ] [ Class "A" Foam ] [ Class"A" Non-Foam ]  [ Training Foam ]
[ Truck Wash And Wax ] [ Flash Preventing Emulsifier ] [ Turn Out Clean ] [ Machine Turn Out Clean ]
< General Information >
[ About Denko ] [ List of Denko Users ] [ Customer Testimonials ] [ Place An Order ]
[ Price List ] [ Guest Book . . .Your Feedback ]  [ Material Safety Data Sheets ]
[ For A Dealer Near You ] [ E-mail ] [ Home Page ]

DENKO (TM)
Long Island, New York

www.denkofoam.com | denkofoam@aol.com

Toll Free 1-877-DENKOFOAM
Toll Free Fax 1-888-FOAMFAX | E-mail